因为我们学校的校园网是通过在本机运行一个客户端来上网的，所以我在linux下上网必须使这个软件能够运行，才能上咱linuxsir,于是我就想着怎么来安装一个最新版的wine来让它支持汉字。
下面是我的安装步骤：
安装前的准备把原先的wine卸载掉，redhat 7.3有wine和wine-devel两个文件，先卸载掉第二个，然后再卸载第一个，如果你更好的想玩游戏，把OPENGL也升级一下，freetype不用升级了，redhat 7.3自带的就可以满足汉字的支持了。
把你的C盘挂接在linux下，建立目录来挂接
c盘
mkdir /winc
挂接C盘
mount /dev/hda1 /winc
下载wine的最新版到/wind，http://www.winehq.com上边有它的最新版wine-20020804.tar.gz。
以普通用户登录linux,把wine-20020804.tar.gz拷贝到/tmp目录下，进入/tmp目录。
shell〉cd /tmp
解压wine
shell〉tar vfzx wine-20020804.tar.gz
进入解压后的目录
shell〉cd wine-20020804
用wine的安装工具进行安装
shell〉./tools/wineinstall
然后就是漫长的等待。
在安装过程中它要你回答yes/no,你选择yes就可以了。wine自动搜索windows的目录的，等你你编译完了，它要让你输入root的密码进入安装，这是就快安装完了，如果安装成功，就会有good lucky的提示。
在shell下运行wine，第一次运行不成功，这是正常,因为没有在/root/.wine/config文件里配置好.找到这些吧。
[Drive C]
"Path" = "/usr/share/win_c"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
改为:[Drive C]
"Path" = "/winc"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
就可以了，如果你安装了simsun字体.wine默认就会找到这个字体的，下边就是我的/root/.wine/config。
WINE REGISTRY Version 2
;; All keys relative to MachineSoftwareWineWineConfig
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive A]
"Path" = "/mnt/floppy"
"Type" = "floppy"
"Label" = "Floppy"
"Serial" = "87654321"
"Device" = "/dev/fd0"
[Drive C]
"Path" = "/winc"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
; make sure that device is correct and has proper permissions !
"Device" = "/dev/cdrom"
[Drive E]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"
[Drive F]
"Path" = "${HOME}"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"
[Drive Z]
"Path" = "/"
"Type" = "network"
"Label" = "Root"
"Filesystem" = "win95"
[wine]
"Windows" = "c:windows"
"System" = "c:windowssystem"
"Temp" = "e:"
"Path" = "c:windows;c:windowssystem;e:;e: est;f:"
"Profile" = "c:windowsProfilesAdministrator"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
"ShellLinker" = "wineshelllink"
# 〈wineconf〉
[DllDefaults]
; "EXTRA_LD_LIBRARY_PATH" = "${HOME}/wine/cvs/lib"
"DefaultLoadOrder" = "native, builtin, so"
[DllOverrides]
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"wsock32" = "builtin"
"winsock" = "builtin"
"advapi32" = "builtin, native"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv
